DeWALT 20 kW Single Phase Electric Heater
Forced-Air Electric Heater with Thermostat
$1,449.99
Part Number:
DXH2000TS
In stock
PayPal and interest-free Pay Later options are available at checkout.
The DeWALT 20 kW Single Phase Electric Heater, DXH2000TS, is designed with dual coil supports, an oversized ergonomic handle, and includes a wheel kit for maximum convenience and ease of use on the job site. This powerful electric construction heater operates at 20,000 Watts on a 240 V single phase circuit. It can also be used at 13,000 Watts with the flip of a switch.
Additional Product Information:
- Two Stage Operation connects to a 100A or 60A breaker. 100A service provides high or low heat outputs
- Burner coils are supported at both the top and bottom to reduce transport noise and provide extra support for increased coil life
- Recessed controls provide protection for switches and knobs
- Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temperature
- Designed and certified as an unattended source of jobsite heat
- Fan only setting for circulating air on the jobsite
Specifications:
- Does not come wired with a cord
- Amps: 54/81 A
- Heater type: electric
- Minimum breaker required: 2-pole 100 A @ 20 kW/2-pole 60 A @ 13 kW
- Output (BTU/hr): 68,242/44,357
- Output (CFM): 600CFM
- Output (kW): 20/13
- Phase: single
- System: 240 V
- Watts: 20,000
- Weight: 45 lbs
Part Number | DXH2000TS |
---|---|
Condition | New |
Brand | DeWalt |
Write Your Own Review