Ramset .300 x 1" Drive Pins with Washer, 100 Pack
Drive Pins w/Washers - 100/pack
$11.99
Part Number:
R00797
In stock
PayPal and interest-free Pay Later options are available at checkout.
- 1" (25mm) long drive pins with washers
- Used to attach metal tracks to concrete
- 100 to a pack
- Used in low-velocity powder actuated tools
- Compatible with tools from Ramset, Hilti, Simpson and Powers -
- Check your owner's manual before ordering
- Alternate part number: 1508SD
| Part Number | R00797 |
|---|---|
| Condition | New |
| Brand | Ramset |
Additional Information
This drive pin w/washer is designed for use in most powder actuated tools (Ramset, Hilti, Remington 22 cal. Tools). The washer is 16 gage metal and is 7/8” in diameter. The purpose of the pin w/washer is to increase the bearing surface against the material to be fastened.
The .300x1Pin w/Washer, REM R00797, has a shank length of 1”. They are sold in boxes of 100.
Write Your Own Review
