Bosch 1-9/16" Spline Combination Hammer
PayPal and interest-free Pay Later options are available at checkout.
The Bosch 1-9/16” Spline Combination Hammer provides maximum productivity in all day drilling and chiseling applications. At 6.1 ft.-lbs. of impact energy (E.P.T.A), PTL RH540S provides up to 30% more impact energy versus the previous model for best in class performance. This Bosch Spline Combination Hammer also provides variable speed for better bit control during application start-up.
Additional Product Features
- Spline bit system – accommodates accessories with spline or 3/4" round hex shanks
- Combination dual mode selector – selector knob allows the tool to be switched between rotary hammer mode or hammer-only mode
- Vario-Lock™ positioning – rotates and locks chisel into 12 different positions to optimize working angle
- Innovative service modules – designed so a qualified service technician can quickly replace the brushes and cord
- 360° Auxiliary handle – provides a wide range of movement along with operator comfort Integral clutch – disengages torque transmission if the bit gets into a bind situation
- Grounded design, CSA listed, complies to OSHA
- 12 Amp
- 2900 bpm (blows per minute)
- 54 ft cord length
- Maximum speed: 340 rpm
- 14.4 lbs
- 10.5" H x 4" W x 18" D
- Keyless chuck design
- Includes auxiliary handle and carrying case
| Part Number | RH540S |
|---|---|
| Condition | New |
| Brand | Bosch Tools |
| Size | 1-9/16" |
Additional Information
The Bosch 1-9/16” Spline Combination Hammer provides maximum productivity in all day drilling and chiseling applications. At 6.1 ft. lbs. of impact energy (E.P.T.A), PTL RH540S provides up to 30% more impact energy versus the previous model for best in class performance. This Spline Combo Hammer by Bosch also provides variable speed for better bit control during application start-up.
Key features:
- Spline bit system – accommodates accessories with spline or ¾” round hex shanks
- Combination dual mode selector – selector knob allows the tool to be switched between rotary hammer mode or hammer-only mode
- Vario-Lock™ positioning – rotates and locks chisel into 12 different positions to optimize working angle
- Innovative service modules – designed so a qualified service technician can quickly replace the brushes and cord
- 360° Auxiliary handle – provides a wide range of movement along with operator comfort
- Integral clutch – disengages torque transmission if the bit gets into a bind situation
- Grounded design, CSA listed, complies to OSHA
- 12 AMP
- 2900 BPM
- 54 ft. cord length
- Maximum Speed: 340 RPM
- 14.4 pounds
- 10.5” H x 4” W x 18” D
- Blue