Dustless Technologies HEPA Filter, 13201

The Dustless Technologies HEPA Filter, 13201, is part of a patented filtration system that is specifically designed to capture the extremely fine dust created by grinding, cutting and sanding material like concrete, stone, masonry, fiberglass and drywall.

Certified and independently tested, the Dustless HEPA filter guards workers and the job site from harmful airborne particles and dangerous irritants. The HEPA filter material catches microscopic dust particles down to 0.3 micron and filters 99.97% of dust, exceeding EPA Lead-Safe Regulations and Government requirements, protecting your health and keeps you working during an inspection. The HEPA filter is designed with a large surface area and protective steel frame so that suction stays strong.

This replacement HEPA filter can be used one of two ways. If used as a replacement on a Dustless HEPA Vacuum that was factory certified, the vacuum will retain its certification, which is important when doing work under OSHS and NIOSH guidelines. Without certification, an inspector can shut the operation down.

If, however, this filter is used to convert a standard Dustless Wet/Dry Vacuum to a HEPA unit, it will not be certified. It will provide far superior filtration down to .3 microns, but it won’t pass inspection on the job site.

Additional Product Information:

• Exceeds EPA RRP standards, OSHA and NIOSH guidelines protecting your health
• Certified to IEST-RP-CC001.5, insuring a minimum filtration efficiency of 99.97% at 0.3 micron
• Large surface area and steel frame support high air flow rate for superior dust collection
• Protects against harmful airborne particles like silica and hexavalent chromium
• HEPA Replacement Filter For Dustless HEPA Vacuum model D1606
• Meets jobsite inspections requirements