16 Gallon HEPA Wet Dry Dustless Vacuum

The MTC 16006, 16 Gallon HEPA Dustless Vacuum is ideal for renovation contractors who must comply with EPA regulations covering lead paint removal. This vacuum gives users a distinct advantage because they can switch from dry to wet operation without worrying about getting the HEPA filter wet.

The Micro Pre-filter makes this vacuum very cost-efficient to use over time because of how it extends the life of the HEPA filter. It captures particles down to 0.5 micron very close to the HEPA filtration of 0.3 micron. Because the HEPA filter is used for just the tiniest of particles, it can last up to 30 times longer when used with a Micro Pre-filter.

The Dustless HEPA Wet/Dry Vacuum can be used to vacuum water without fear of getting the HEPA filter wet. A baffle wall inside the canister keeps water from reaching the HEPA filter, under normal operation.

This vacuums emits 81 decibels of noise, has a powerful 5 HP motor, runs at 24,140 RPMs and produces 76.9 in. water lift at 126 CFM. A 16 Gallon canister and Micro Pre-filter bag support optimum air flow while holding up to 40 lbs. of dirt and debris.

Additional Product Information:

• Vacuum itself is certified to be 100% air-tight required to support true HEPA rated performance
• Meets EPA RRP guidelines
• Goes from dry to wet operation without stopping
• Holds up to 40 lbs. of fine dust
• Certified to pass OSHA and NIOSH field inspections: IEST-RP-CC001.5 insuring a minimum filtration efficiency of 99.97% at 0.3 micron
• Use the optional micro pre-filter to extend the life of the HEPA filter to save money