Fan Assy
PayPal and interest-free Pay Later options are available at checkout.
Part Number | 2154-0009-00 |
---|---|
Condition | New |
Brand | GHP Group |
Additional Information
Fan blades play an extremely important role in the operation of the entire heating system. The 7 ½ inch 5 bladed fan 2154-0009-00 from equipsupply.com is responsible for producing hot air that is forced out of the kerosene heater. Also, the fan tells where the burn will take place in the combustion chamber. If the “inches of pitch” is off on your fan it needs to be replaced. Bending your fan blade back into place to adjust the pitch is NOT recommended. If you feel you must adjust your fan, or the pitch is off, you NEED to replace your fan for the 50Btu to 75BTU kerosene forced air heater with a GHP 2154-0009-00 or 2154000900 from equipsupply.com. This 7 ½ inch 5 bladed fan works on GHP or RMC kerosene forced air heaters from Dyna-Glo, Dyna-Glo Pro, Thermoheat, Workhorse, Workhorse-03, Dayton, and Duraheat. The following would be some of the heater model numbers for the above name brand heater that this 2154-0009-00 5 bladed fan will work with from equipsupply.com RMC-KFA65T, RMC-KFA65T-PRO, RMC-KFA65WH-03, RMC-KFA75WH-03, DFA-75T, RMC-KFA75TDGD, KFA-50DGD, KFA75DGD, RMC-KFA75TDGP-01, RMC-KFA75TDGP, KFA50H, KFA75H, RMC-KFA75TL, and KFA75L.