Heat Wagon 310K BTU Indirect-Fired Oil Heater HVF310

This Indirect Fired Heater by Heat Wagon is the ideal choice for any medium to large industrial application. This oil-fueled heater produces clean, dry heat. The Four-Loop Exhaust System ™ helps produce the clean, dry air by providing higher efficiency while in use. The heater runs on #1 or #2 diesel, kerosene, JP-8 or Jet-A fuel. With an output of 2,500 CFM, this heater will have a temperature rise of 160 degrees F. With its two wheels and handle, this heater has one-man maneuverability! This unit is ductable up to 50 feet (duct and adapter SOLD SEPARATELY), allowing warm air to be spread around evenly. The 35.7 gallon fuel tank delivers up to 16 hours run time!

The Heat Wagon IDF Oil Fired Heater, HVF310, has an output of 310K BTU/HR. It runs on a 15 amp circuit, which means low-power consumption. The heater weighs 270 pounds when empty. The dimensions (L X W X H) are 69” X 28” X 38”. An optional thermostat is available (part #THIDF, SOLD SEPARATELY), which allows constant temperature control between 30-110 degrees F. This heater is CSA approved.

• Produces clean, dry heat
• 35.7 gallon fuel tank: 16 hours run time
• Temperature rise of 160 degrees F
• Indirect fired oil heater
• Optional remote thermostat THIDF
• Ductable up to 50'
• Runs on 120 Volt 12 Amp circuit
• Runs on 1# or #2 diesel, kerosene, JP-8 or Jet A
• Output of 2,500 cfm
• Ships by truck